FAQs
More FAQs- How can ServiceMaster Clean help?
- Isn't clean, disinfect and sanitize the same thing?
- How long will it take to have my floors coated with acrylic?
If you need help maintaining routine cleanliness conditions in your workplace, you may want to call in a professional like ServiceMaster Clean to sanitize and disinfect.
Our expert technicians are trained to clean first to break organic loads and remove gross soiling. Then they sanitize or disinfect as appropriate.
When we do this, we follow the guidelines set in place by the health officials such as WHO and Health Canada. There are many methods of disinfection and you can be assured that your technician is trained to do each in the recommended manner. Our technicians also use appropriate PPE (Personal Protective Equipment) with your security and privacy in consideration.
To the general public, these three terms — clean, disinfect, sanitize — are often used interchangeably. However, to a cleaning professional, these terms are not the same and can refer to very different outcomes. According to Public Health Canada and the U.S. Center for Disease Control, the definition of these terms are as follows:
CleanThis refers to the removal of visible dirt and debris through the use of soap or detergent and water. While this process may remove germs from surfaces, it does not necessarily kill the germs. This said, the mere act of germ removal lowers their numbers and does help in reducing the risk of infection.
DisinfectWith disinfection, germs are actually KILLED on surfaces through the use of chemicals. This process does not necessarily clean dirty surfaces or remove germs, but by killing germs on a surface after cleaning, it can further lower the risk of spreading infection.
SanitizeLastly, the term sanitize has its roots in the word “Sanitary” which is defined as “of or relating to health”. When you keep this in mind, to sanitize means lowering the number of germs on surfaces to a safe level, as judged by public health standards or requirements. This can be achieved by either cleaning and/or disinfecting surfaces to lower the risk of spreading infection.
Not to confuse you anymore, but as an added bonus, we’ll also define the term “sterilize” which is the process in which chemicals are used to kill ALL microbial life including bacteria, viruses, spores and fungi. This is a process that is very rarely undertaken in a facility outside of a healthcare setting.
So, for a cleaning professional, our disinfection process for your commercial facility is routinely a 2-step process - We clean first, then disinfect - in order to provide you with a sanitary facility in which to work!
Sources:
- https://www.cdc.gov/flu/school/cleaning.htm
- https://www.canada.ca/en/public-health/services/publications/diseases-conditions/cleaning-disinfecting-public-spaces.html
- https://www.publichealthontario.ca/-/media/documents/bp-cleaning-disinfection-sterilization-hcs.pdf?la=en
- https://www.foodsafety.ca/blog/understanding-difference-between-cleaning-sanitizing-sterilizing
Preparation will depend on the condition of the existing floor, current number of coats, repairs required, etc. When applying an acrylic finish, stripping of the old finish is usually necessary. When that’s the case, finish removal plus the application of 3 coats of finish requires 1 hour for every 150 square feet of flooring. Generally, 3 coats of finish are required to achieve the desired effect. If a floor does not require stripping, it can generally be shower scrubbed which is a procedure used for preparing a floor for receiving a new layer of finish. Once that has taken place, a floor can be recoated at anywhere from 4,000 to 6,000 square feet per hour.